Virtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board + main with coin
Virtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board + what comes in the packageVirtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board + back viewVirtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board + top view in handVirtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board + fully populated hand shotVirtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board + fully populated isometric shotVirtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board + fully populated sideVirtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board attached to LCD

Virtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board +

$5.95

The Virtuabotix 6PIN Triple Slider was designed to plug directly into the Versalino LCD & Keypad board, and makes a great addition to all sorts of control applications. Like any other standard Virtuabotix 6PIN device it can also be plugged directly into a Breadboard and used in numerous electronics projects with ease.

You could use it for multiple servo control, or for controlling the red, green, and blue of an RGB LED or panel or you could just use a single slider for controlling light fading, or fan speed inside your application. Either way we hope it makes your next project a ton easier to use and put together, and we can't wait to see how you put it to use.

4 in stock

Product Description

Package Contents:

• 1 x Virtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board +

Specifications

1 x standard Virtuabotix 6PIN Analog port (only A0, A1, & A2 used)
1 x Pre-Soldered Slider (Applies voltage between Ground and Vdd to pin A2)
1 x 6 pin Male to Male header (use optional)

Note: Additional sliders available from Virtuabotix.

Slider Specs

Slider type: POT SLIDE 5K OHM .1W 20MM (PDV20)
Resistance (Ohms): 5k
Power (Watts): 0.1W, 1/10W
Tolerance: ±20%
Adjustment Type: Top, Standard, 20mm
Mounting Type: Through Hole
Size / Dimension: Rectangular – 1.575″ L x 0.154″ W x 0.512″ H (40.00mm x 3.90mm x 13.00mm)

Reviews

There are no reviews yet.

Be the first to review “Virtuabotix 6PIN Triple Slider 1.0 (with 1 slider) for Arduino and Versalino LCD & Keypad board +”