Sharp Analog Distance Sensor 4-30cm main
Sharp Analog Distance Sensor 4-30cm frontSharp Analog Distance Sensor 4-30cm with coinSharp Analog Distance Sensor 4-30cm in bagSharp Analog Distance Sensor 4-30cm top

Sharp Analog Distance Sensor 4-30cm (Retired)

$14.00

The Sharp Analog Distance Sensor 4-30cm is a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than other IR alternatives. Interfacing to most microcontrollers is straightforward: the single analog output can be connected to an analog-to-digital converter for taking distance measurements, or the output can be connected to a comparator for threshold detection. The detection range of this version is approximately 4 cm to 30 cm (1.5″ to 12″).
The Sharp Analog Distance Sensor 4-30cm uses a 3-pin JST PH connector that works with 3-pin JST PH cables for Sharp distance sensors (not included). It is also possible to solder three wires to the sensor where the connector pins are mounted. When looking at the back, the three connections from left to right are power, ground, and the output signal.

Out of stock

Product Description

Package Contents:

Sharp Analog Distance Sensor 4-30cm

Technical Specifications of Sharp Analog Distance Sensor 4-30cm

Operating voltage: 4.5 V to 5.5 V
Average current consumption: 12 mA (note: this sensor draws current in large, short bursts, and the manufacturer recommends putting a 10 µF capacitor or larger across power and ground close to the sensor to stabilize the power supply line)
Distance measuring range: 4 cm to 30 cm (1.5″ to 12″)
Output type: analog voltage
Output voltage differential over distance range: 2.3 V (typical)
Update period: 16.5 ± 4 ms
Size: 44.5 mm × 18.9 mm × 13.5 mm (1.75″ × 0.75″ × 0.53″)
Weight: 3.5 g (0.12 oz)

Reviews

There are no reviews yet.

Be the first to review “Sharp Analog Distance Sensor 4-30cm (Retired)”

SKU: 615872424214 Categories: , Brands: .