5 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 in bag
1 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 on coin1 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 in iron side1 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 in iron top1 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 in hand1 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 vertical side1 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 vertical5 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 back of bag

5 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 (Retired)

$44.95

This 1/16″ Chisel tip is designed to work with PACE PS-90, PS-80, SP-2, and IR-70 Irons, and is an excellent rework and SMT manufacturing iron tip designed specifically for easy to access low pitch soldering applications.

This tip is suitable for Leaded and Lead free solders. This is truly the ideal general purpose tip for lead free solder and through hole manufacturing, and extended reach makes it possible to access areas of your device that may otherwise be difficult to reach. This tip works well for low pitch applications, and a finer tip may be needed for fine pitch and small surface mount manufacturing and rework.

Note: Having an extended reach means that the tip is further from the iron, this may make it necessary to adjust your irons temperature to ensure the tip stays at the correct temperature.

Available on backorder

Product Description

Package Contents:

5 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5

Chisel tip diagram

Technical Specifications:

Tip Type: 1/16″ Chisel, Extended Reach

Nozzle Dimensions: 1.6mm (0.063″)

Intended Handpiece/Iron: PS-90, PS-80, SP-2, IR-70 Irons

Applications: Hard to reach medium to Low pitch manufacturing and Rework.

Temperature Recommendations (these are general purpose thermal suggestions, see solder instructions/datasheet from your solder supplier for specific melting/operational ranges for it’s particular chemical make up).

-Leaded (non-ROHS): 183 – 215 Degrees Celcius (361–419 Fahrenheit)

-Lead Free (ROHS): 250 – 385 Degrees Celcius (482–725 Fahrenheit)

(Lead Free melting temperatures Vary greatly based on chemical make up, and should be adjusted accordingly)

Reviews

There are no reviews yet.

Be the first to review “5 x PACE 1/16 Extended Reach Chisel Tip PS-90, PS-80, SP-2, IR-70 Irons 1121-0533-P5 (Retired)”

SKU: 615872422876 Category: Brands: .