Versalino™ Uno Video Getting Started Guide

This is a video getting started guide for the Versalino™ Uno. We are posting the first video now, but we have about eight other videos that will be up shortly.

Step 1.) Gather Your Materials: You will need a Versalino Uno, a six pin standard FTDI programmer, a USB cable for your FTDI programmer, and a Light Emitting Diode (LED).

Step 2.) Installing the Arduino™ IDE, and install the Versalino™ Library (The following must be downloaded):
The latest Arduino™ IDE can be found here
The latest Versalino™ Library can be found here:


Step 3.) Knowing and Programming the Versalino™ Uno

No comments yet.

Leave a Reply